335070 + 343870 Carburetor Repair Seal Kit Fits Evinrude / Johnson 60° V4, 60° V6 (90-175 HP)
335070 + 343870 Carburetor Repair Seal Kit Fits Evinrude / Johnson 60° V4, 60° V6 (90-175 HP) is backordered and will ship as soon as it is back in stock.
Need help checking fitment?
Need help checking fitment?
Send us the product link, your engine brand, full model and serial number, and the reference on your original part. Include the year if known.
Shipping & delivery
Shipping & delivery
Have a delivery question? Include the part reference, quantity, destination country and postal code so we can check the shipping details for your order.
Returns & warranty support
Returns & warranty support
For help with an order or product issue, send your order number, part reference and a description of the issue. Include photos where relevant.
Product Overview
XR MARINE · CARBURETORS & REPAIR KITS
335070 + 343870 Carburetor Repair Seal Kit Fits Evinrude / Johnson 60° V4, 60° V6 (90-175 HP)
This Carburetor Repair Seal Kit from XR Marine is designed for carburetor-related servicing on specified Johnson and Evinrude 90–175 HP outboards with 60° V4 and 60° V6 configurations from 1991 onward. The product references OEM numbers 335070 (gasket component) and 343870 (float chamber carburetor bowl component).
Because multiple carburetor layouts exist across this horsepower range, always verify your engine's 60° V4 or V6 configuration and compare your required bowl and gasket part numbers before ordering.
Product Specifications
Key product details for identification and comparison.
Fitment
The 335070 + 343870 Carburetor Repair Seal Kit from XR Marine fits Evinrude and Johnson 60° V4 and 60° V6 (90–175 HP range as stated) outboard engines in the carburetor tank applications from 1991 onward listed below.
Verify the complete engine model designation on your identification plate, check the 1991 onward production requirement and 60° V4 or 60° V6 block configuration, and match your required gasket and float chamber bowl component numbers against the listed OEM references. Horsepower alone cannot confirm fitment.
-
Brand: Evinrude / Johnson (Johnson scope) | Power: 90–175 HP range as stated | Year: 1991 onward (end year not specified) | Restriction: Carburetor tank application; 60° V4 engine configuration! Check conditions
-
Brand: Evinrude / Johnson (Johnson scope) | Power: 90–175 HP range as stated | Year: 1991 onward (end year not specified) | Restriction: Carburetor tank application; 60° V6 engine configuration! Check conditions
-
Brand: Evinrude / Johnson (Evinrude scope) | Power: 90–175 HP range as stated | Year: 1991 onward (end year not specified) | Restriction: Carburetor tank application; 60° V4 engine configuration! Check conditions
-
Brand: Evinrude / Johnson (Evinrude scope) | Power: 90–175 HP range as stated | Year: 1991 onward (end year not specified) | Restriction: Carburetor tank application; 60° V6 engine configuration! Check conditions
OEM & Part Number References
Use the complete reference number, including its suffix, when comparing parts. Reference numbers do not confirm that every version is interchangeable.
Note on component numbers: 335070 and 0335070 are listed for the gasket component. 343870, 433000, 766418, 0433000, and 0766418 are listed for the float chamber carburetor bowl component. These are component references, not separate replacement numbers for the complete package.
Installation Guide
General installation overview. Follow the service manual for your exact engine and carburetor configuration. Fuel-system work requires the appropriate skills and precautions.
- Preparation and Component Verification: Ensure the engine is shut off and cool, disconnect the ignition source, and isolate the fuel supply in a well-ventilated workspace away from open flames. Before disassembly, confirm your engine is a 60° V4 or 60° V6 model (1991 onward) and compare the new components against your existing float chamber bowl and gasket references.
- Disassembly and Inspection: Document all fuel line routings and linkage connections before removing the carburetor components according to your factory service manual. Clean the mating surfaces carefully without scratching or gouging the housing, and compare the profile, ports, and mounting points of the existing parts against the replacement components.
- Reassembly and Leak Check: Install the matching replacement parts following the sequence and specifications in your service manual. Reconnect the fuel lines and prime the system while inspecting closely for any fuel weeping around the float chamber bowl and gasket seams. Only perform an engine run test with a proper cooling water supply attached, and shut the engine down immediately if any fuel leak or abnormal operation occurs.
Before You Order
A careful fitment check helps you choose the right part the first time.
- Match the full engine model designation on the identification plate.
- Check the individual year entry and any serial-number or version restrictions.
- Compare the complete OEM reference number, including its suffix. Horsepower or appearance alone is not enough.
- Confirm the package contents and the quantity needed for your repair.
- Verify that your Johnson or Evinrude 90–175 HP outboard uses the 60° V4 or 60° V6 block configuration from 1991 onward.
- Distinguish between the gasket component references (335070, 0335070) and the float chamber bowl component references (343870, 433000, 766418, 0433000, 0766418) when checking your parts catalog.
Need help checking fitment? Have your engine identification details, the existing part number and clear photos ready when you contact XR Marine.
Ask XR Marine About FitmentWhy XR Marine
Carburetors are our focus. Fitment comes first.
XR Marine specializes in marine carburetors, carburetor repair kits and the related parts needed for these repairs. We keep our focus on this product line so that product information stays centered on the details that matter: engine applications, complete part-number references and what is included.
Use our individual fitment entries and part references to compare your application, then contact XR Marine if you need help before ordering.
Shipping
Free shipping on all orders. No minimum order value.
For questions about delivery to your destination or delivery timing, contact XR Marine before placing your order.
Contact XR Marine About ShippingLifetime Warranty
XR Marine provides lifetime warranty coverage for product quality defects. Normal wear and tear is excluded.
- Covered: product quality defects.
- Not covered: normal wear and tear.
Contact XR Marine for warranty assistance. Having your order details and a description of the issue available can help us understand your request.
Contact XR Marine About WarrantyFrequently Asked Questions
Answers to common questions about this product and its application.
Which Johnson and Evinrude engines does this 335070 + 343870 kit fit?
It is listed for Johnson and Evinrude 90–175 HP outboard carburetor tank applications with 60° V4 or 60° V6 engine configurations from 1991 onward. Always verify your exact engine model and required component part numbers before ordering.
What do the different OEM reference numbers represent?
The listed numbers correspond to specific components rather than separate replacement numbers for the entire package. Numbers 335070 and 0335070 refer to the gasket component, while 343870, 433000, 766418, 0433000, and 0766418 refer to the float chamber carburetor bowl component.
Can I select this kit based only on my engine's 90–175 HP rating?
No. Johnson and Evinrude produced multiple engine block architectures within the 90–175 HP range. You must confirm that your outboard is a 1991 or later 60° V4 or 60° V6 carburetor tank application and match the OEM component references to your parts catalog.
How can I confirm the exact items and quantities included in the package?
Detailed item-by-item package quantities are not listed on this page. Please contact XR Marine prior to placing your order to confirm the exact supplied contents and how many kits you need for multi-carburetor V4 or V6 servicing.
Is this an OEM Evinrude or Johnson factory part?
No. This product is supplied under the XR Marine brand for the specified Evinrude and Johnson applications. OEM numbers and GLM 37790 are provided for reference and part comparison.
What shipping and warranty policies apply to this order?
XR Marine offers free shipping on all orders with no minimum order value. The product is backed by a lifetime warranty covering product quality defects, with normal wear and tear excluded.
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.