13200-944J0-000 Carburetor Fits Suzuki Outboard DT 40 40MCLE, DT 40 40MCSE (40 HP)

Product Overview

XR MARINE · CARBURETORS & REPAIR KITS

13200-944J0-000 Carburetor Fits Suzuki Outboard DT 40 40MCLE, DT 40 40MCSE (40 HP)

This XR Marine product is a replacement carburetor for specified 1984 and 1985 Suzuki DT 40 (40 HP) outboard model variants. It is intended for full carburetor replacement when servicing a matching Suzuki DT 40 outboard, rather than a carburetor repair kit for partial component service. Because fitment depends on exact model variant codes and specific serial/VIN references (04003-401001 for listed 1984 models and 04003-503897 for listed 1985 models), always verify your complete engine designation and reference number suffix before ordering.

Product Specifications

Key product details for identification and comparison.

Fitment

The 13200-944J0-000 Carburetor from XR Marine fits Suzuki Outboard DT 40 40MCLE, DT 40 40MCSE, DT 40 40ECLE, DT 40 40ECSE, DT 40 40ECSF, DT 40 40ECLF, DT 40 40MCLF, and DT 40 40MCSF (40 HP) outboard engines with the specified serial/VIN references in the model-year applications listed below.

Match the complete model designation on your engine identification plate against the individual year entries below, compare the full OEM reference number including its suffix, and verify the listed serial/VIN reference (04003-401001 for 1984 applications or 04003-503897 for 1985 applications; no serial range is specified). Horsepower alone cannot confirm fitment.

• Brand: Suzuki Outboard | Model: DT 40 40MCLE | Power: 40 HP | Year: 1984 | Serial/VIN Reference: 04003-401001
  ✓ Fits
• Brand: Suzuki Outboard | Model: DT 40 40MCSE | Power: 40 HP | Year: 1984 | Serial/VIN Reference: 04003-401001
  ✓ Fits
• Brand: Suzuki Outboard | Model: DT 40 40ECLE | Power: 40 HP | Year: 1984 | Serial/VIN Reference: 04003-401001
  ✓ Fits
• Brand: Suzuki Outboard | Model: DT 40 40ECSE | Power: 40 HP | Year: 1984 | Serial/VIN Reference: 04003-401001
  ✓ Fits
• Brand: Suzuki Outboard | Model: DT 40 40ECSF | Power: 40 HP | Year: 1985 | Serial/VIN Reference: 04003-503897
  ✓ Fits
• Brand: Suzuki Outboard | Model: DT 40 40ECLF | Power: 40 HP | Year: 1985 | Serial/VIN Reference: 04003-503897
  ✓ Fits
• Brand: Suzuki Outboard | Model: DT 40 40MCLF | Power: 40 HP | Year: 1985 | Serial/VIN Reference: 04003-503897
  ✓ Fits
• Brand: Suzuki Outboard | Model: DT 40 40MCSF | Power: 40 HP | Year: 1985 | Serial/VIN Reference: 04003-503897
  ✓ Fits

OEM & Part Number References

Use the complete reference number, including its suffix, when comparing parts. Reference numbers do not confirm that every version is interchangeable.

What's Included

Check the supplied components before planning your repair.

• Carburetor (included)

Installation Guide

General installation overview. Follow the service manual for your exact engine and carburetor configuration. Fuel-system work requires the appropriate skills and precautions.

1. Preparation and Verification: Confirm the engine is shut off and cooled down. Isolate the fuel supply and disconnect the ignition/battery system according to your Suzuki outboard service manual while working in a well-ventilated area away from ignition sources. Compare the replacement carburetor against the existing unit and your engine identification plate to confirm matching flange geometry, throttle/choke linkage points, and fuel inlet orientation.
2. Removal and Replacement Installation: Document or photograph the routing of fuel hoses and the exact connection positions of throttle and choke linkages before removal. Detach the old carburetor per the service manual, inspect the mounting surfaces for cleanliness and damage, and install the replacement carburetor following the manual's sequence and fastening procedures. Verify that all linkages move freely through their full travel without binding.
3. Fuel Leak Check and Running Verification: Reconnect the fuel line, prime the system, and carefully inspect all fuel fittings and carburetor seams for any sign of fuel leakage before attempting to start the engine. Only test-run the outboard with proper cooling water supply attached, then perform any required idle or linkage adjustments specified in your Suzuki service manual. Shut down immediately if any fuel leak, linkage sticking, or abnormal running occurs.

Before You Order

A careful fitment check helps you choose the right part the first time.

• Match the full engine model designation on the identification plate.
• Check the individual year entry and any serial-number or version restrictions.
• Compare the complete OEM reference number, including its suffix. Horsepower or appearance alone is not enough.
• Confirm the package contents and the quantity needed for your repair.
• Verify the specific serial/VIN reference listed for your year group (04003-401001 for the 1984 DT 40 variants; 04003-503897 for the 1985 DT 40 variants).
• Confirm that your repair requires a replacement carburetor rather than a carburetor rebuild/repair kit.

Need help checking fitment? Have your engine identification details, the existing part number and clear photos ready when you contact XR Marine.

Why XR Marine

Frequently Asked Questions

Answers to common questions about this product and its application.