6L5-14301-02-00 Carburetor Fits Yamaha Outboard 3M (3 HP)

Product Overview

XR MARINE · CARBURETORS & REPAIR KITS

6L5-14301-02-00 Carburetor Fits Yamaha Outboard 3M (3 HP)

This XR Marine replacement carburetor is intended for servicing the listed Yamaha Outboard 3M (3 HP) engines from 1990 through 2002. It is offered as a complete non-kit carburetor unit rather than a gasket or rebuild kit.

Primary OEM references for this unit are 6L5-14301-02-00 and 6L5-14301-03-00. Always match the full engine model designation, model year and complete OEM reference suffix before ordering, as a partial prefix alone does not identify a specific carburetor version.

Product Specifications

Key product details for identification and comparison.

Fitment

The 6L5-14301-02-00 Carburetor from XR Marine fits Yamaha Outboard 3M (3 HP) engines in the model-year applications listed below.

Verify the exact model designation on your engine identification plate against the individual year entries below, and compare your complete OEM part number—including its suffix—with 6L5-14301-02-00 or 6L5-14301-03-00. Horsepower rating or a partial base number alone cannot confirm fitment.

• Brand: Yamaha Outboard | Model: 3M | Power: 3 HP | Year: 1990
  ✓ Fits
• Brand: Yamaha Outboard | Model: 3M | Power: 3 HP | Year: 1991
  ✓ Fits
• Brand: Yamaha Outboard | Model: 3M | Power: 3 HP | Year: 1992
  ✓ Fits
• Brand: Yamaha Outboard | Model: 3M | Power: 3 HP | Year: 1993
  ✓ Fits
• Brand: Yamaha Outboard | Model: 3M | Power: 3 HP | Year: 1994
  ✓ Fits
• Brand: Yamaha Outboard | Model: 3M | Power: 3 HP | Year: 1995
  ✓ Fits
• Brand: Yamaha Outboard | Model: 3M | Power: 3 HP | Year: 1996
  ✓ Fits
• Brand: Yamaha Outboard | Model: 3M | Power: 3 HP | Year: 1997
  ✓ Fits
• Brand: Yamaha Outboard | Model: 3M | Power: 3 HP | Year: 1998
  ✓ Fits
• Brand: Yamaha Outboard | Model: 3M | Power: 3 HP | Year: 1999
  ✓ Fits
• Brand: Yamaha Outboard | Model: 3M | Power: 3 HP | Year: 2000
  ✓ Fits
• Brand: Yamaha Outboard | Model: 3M | Power: 3 HP | Year: 2001
  ✓ Fits
• Brand: Yamaha Outboard | Model: 3M | Power: 3 HP | Year: 2002
  ✓ Fits

OEM & Part Number References

Use the complete reference number, including its suffix, when comparing parts. Reference numbers do not confirm that every version is interchangeable.

What's Included

Check the supplied components before planning your repair.

• Included Component: Carburetor (OEM references: 6L5-14301-02-00; 6L5-14301-03-00). Offered as a non-kit product.

Installation Guide

General installation overview. Follow the service manual for your exact engine and carburetor configuration. Fuel-system work requires the appropriate skills and precautions.

1. Verify identification before disassembly: Confirm that your engine plate shows a listed Yamaha 3M (3 HP) model year (1990–2002) and compare the replacement carburetor against your existing unit and the full OEM references (6L5-14301-02-00 or 6L5-14301-03-00).
2. Prepare a safe workspace: Shut off the engine, allow it to cool completely, disconnect the spark plug lead to prevent accidental starting and shut off the fuel supply in a well-ventilated area away from any ignition sources.
3. Document routing and linkages: Take clear reference photos of fuel hose routing, throttle linkage attachment and choke connections before loosening any hardware.
4. Remove the existing carburetor: Drain residual fuel from the float bowl into an approved container, disconnect the fuel line and control linkages, and remove the mounting fasteners per the Yamaha service manual.
5. Inspect mating surfaces and compare ports: Clean the intake mounting surface without gouging the metal. Place the old and new carburetors side by side to confirm matching mounting flange holes, linkage levers and fuel inlet orientation.
6. Mount the replacement carburetor: Position the carburetor on the intake manifold, tighten the mounting fasteners evenly according to the service manual specifications and reconnect the throttle, choke and fuel lines securely.
7. Check control travel and fuel integrity: Operate the throttle and choke controls through their full range to confirm smooth movement without binding. Open the fuel supply and inspect all connections and seams for fuel leaks before attempting to start the engine.
8. Test run with proper cooling water supply: Only run the outboard with the lower unit properly supplied with cooling water. Perform any required idle or mixture adjustments strictly according to the Yamaha service manual, and shut the engine down immediately if any fuel leak, binding or abnormal operation occurs.

Before You Order

A careful fitment check helps you choose the right part the first time.

• Match the full engine model designation on the identification plate.
• Check the individual year entry and any serial-number or version restrictions.
• Compare the complete OEM reference number, including its suffix. Horsepower or appearance alone is not enough.
• Confirm the package contents and the quantity needed for your repair.
• Do not rely on the partial base prefix 6L5-14301 alone; verify that your application calls for 6L5-14301-02-00 or 6L5-14301-03-00.
• Note that this listing is for a replacement carburetor (non-kit product), not a carburetor repair kit or thermostat.

Need help checking fitment? Have your engine identification details, the existing part number and clear photos ready when you contact XR Marine.

Why XR Marine

Frequently Asked Questions

Answers to common questions about this product and its application.